Hulett unloader - Part 7

Well the wash process that I was going to start with did not work out so well, I had to repaint the lower half again. A wash as you know takes time to dry and is hard to control the flow when applying it to a plastic surface. Never the less my results were horrible. This time I started with a 50/50 mix of both "Floquil" Rail Brown and Oxide Red. I sprayed large portions of the model with this color. Then I went back over the whole model lightly overspraying it with the same color to help blend it in. I have attached three (3) photos at this stage. Next, I plan on adding some decals and begin detail painting certain parts of the model. Then I will give it the next round of weathering.